José Manuel Mendoza Duarte

Educación

Postdoctorado

Centro de Tecnología Avanzada (CIATEQ) (2022)

Postdoctorado

Centro de Investigación de Materiales Avanzados, S. C (CIMAV) (2024)

Doctorado en Ciencia de Materiales.

Centro de Investigación de Materiales Avanzados, S. C (CIMAV) (2020)

Maestro en Ciencia de Materiales

Centro de Investigación de Materiales Avanzados, S. C (CIMAV) (2014)

Ingeniero Químico.

Tecnológico Nacional (TECNM) (2012)

Técnico en Máquinas de Combustión Interna

Centro de Bachillerato Técnico y de Servicios No. 122 (CBTis 122) (2005)

Áreas de Interés

• Aleaciones Metálicas Avanzadas
• Grafito expandido
• Materiales compuestos de matriz metalica
• Metalurgia de Polvos
• Metalurgia Física
• Sinterización de Polvos

Últimas publicaciones

• Relationship Between Structure/Microstructure and Hardness of CrMnFeCoNiX0.5 High-Entropy Alloys with Refractory Metals X = V and Mo Obtained by Mechanical Alloying

  Alfredo Martinez Garcia, Sergio González, José Manuel Mendoza Duarte, Cynthia Deisy Gómez Esparza, Marco Antonio Ruiz Esparza Rodríguez, Abel Hurtado Macías, Erick Adrián Juarez Arellano, Emmanuel José Gutiérrez Castañeda, Xóchitl Atanacio Sánchez, Carlos Gamaliel Garay Reyes*, and Roberto Martínez Sánchez*
  COATINGS, Vol.16. No.4. pp1-17 (2026)

• Study of nanohardness and scratch in a CoCrFeMnNiAl HEA consolidated by high-frequency-induction heat

  L. Baylon-García , J.M. Mendoza-Duarte, I. Estrada-Guel, P.A. Guerrero-Seanez, M.A. Ruiz-Esparza-Rodríguez, R. Martínez-Sanchez, A. Hurtado-Macías, A. Martinez-Garcia, S. Gonzalez, E.A. Juarez-Arellano, C.G. Garay-Reyes.
  MATERIALS LETTERS, Vol.404. No.139613. pp4 (2026)

• Microstructural Evolution and Mechanical Behavior of Al-Cu-Mg Alloy with Li and Graphite Additions Processed via High-Energy Ball Milling and Consolidated by High Induction

  J.M. Mendoza-Duarte, I. Estrada-Guel, P.A. Guerrero-Seañez, J.C. Guía-Tello, A. Martínez-García, E.A. Juárez-Arellano, C.G. Garay-Reyes, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.49. No.114159. pp (2025)

• Synergistic Effects of Sub-Micron WC Reinforcement and T6 Heat Treatment on the Evolution of Microstructure and Mechanical Behavior in Al–Cu–Mg Composites Fabricated Through

  Gustavo Rodríguez-Cabriales, Juan Pablo Flores-De los Ríos, Juan Francisco López de Lara-Herrera, Mario Sánchez-Carrillo, Hansel Manuel Medrano Prieto, Jose Manuel Mendoza-Duarte, Marco Antonio Ruiz-Esparza-Rodríguez, Carlos Gamaliel Garay-Reyes, Sergio González, Alfredo Martínez-García, Ivanovich Estrada-Guel, Roberto Martínez-Sánchez
  METALS, Vol.15. No.11. pp1216 (2025)

• Relationship between Microstructure and Wear Behaviour in A356 Alloy and A356/Al2O3 and A356/WC Composites After Casting and Hot-Extrusion

  P.A. Guerrero-Seañez, C.G. Garay-Reyes, L.D. Laguna-Zubia, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, A. Martínez-García, J.L. Hernández-Rivera, J.J. Cruz-Rivera, R. Martínez-Sánchez
  METALS AND MATERIALS INTERNATIONAL, Vol.31. No.. pp742–751 (2025)

• Enhancement of the Electrical Conductivity and Mechanical Properties of Al-Mg-Si and Al-Mg-Zn Ternary Systems After a T8 Heat Treatment

  X. Atanacio-Sánchez, C. G. Garay-Reyes, A. Martínez-García, I. Estrada-Guel, J. M. Mendoza Duarte, P. Guerrero-Seañez, S. González, Enrique Rocha-Rangel, J. J. Cruz-Rivera, E. J. Gutiérrez-Castañeda, R. Martínez-Sánchez
  METALS, Vol.14. No.11. pp1286 (2024)

• Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte

  A. Martinez-Garcia, Víctor M. Orozco-Carmona, J.M. Mendoza-Duarte, E.A. Juárez-Arellano, S. González, M.A. Ruíz-Esparza-Rodríguez, I. Estrada-Guel, C. G. Garay-Reyes, R. Martínez Sánchez
  ELECTROCHIMICA ACTA, Vol.497. No.. pp144601 (2024)

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Aluminum Carbide Formation in Al-Graphite Composites: In Situ Study and Effects of Processing Variables and Sintering Method

  J.M. Mendoza-Duarte, I. Estrada-Guel, J. E. García-Herrera, R. Pérez-Bustamante, H. Arcos-Gutiérrez, A. Martínez-García, X. Atanacio Sánchez, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.28. No.. pp108396 (2024)

• Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

  H. M. Medrano-Prieto, A. Santos-Beltrán, V. Gallegos-Orozco, M. M. Santos-Beltrán, H. Camacho-Montes, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodriguez, I. Estrada-Guel, G. Rodríguez-Cabriales, J. C. Guía-Tello, J. M. Mendoza-Duarte, J. M. Silva-Aceves, J. S. Castro-Carmona, R. Martínez-Sánchez
  Metallography, Microstructure, and Analysis, Vol.13. No.. pp181-187 (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza- Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981–989 (2023)

• Influence of process conditions on the mechanical and microstructural features of milled Al sintered with rapid heating

  J.M. Mendoza-Duarte, I. Estrada-Guel, C.G. Garay-Reyes, R. Pérez-Bustamante, M. Romero-Romero, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.36. No.106539. pp1-7 (2023)

• Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components

  R.E. Villarreal-Loya, C.G. Garay-Reyes, J.M. Mendoza-Duarte, J.L. Hernández-Rivera, J.J. Cruz-Rivera, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS LETTERS, Vol.343. No.. pp134342 (2023)

• Abrasive Wear Behavior of Al-4Cu-1.5Mg-WC Composites Synthesized Through Powder Metallurgy

  G. Rodríguez-Cabriales, C.G. Garay-Reyes, J.C. Guía-Tello, H.M. Medrano Prieto, I. Estrada-Guel, L.J. García-Hernández, M.A Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, K.A. García-Aguirre, S. González, R. Martínez-Sánchez
  Lubricants, Vol.11. No.3. pp12 (2023)

• Effect of Process Parameters on the Graphite Expansion Produced by a Green Modification of the Hummers Method

  Gabriela Tarango-Rivero, José M. Mendoza-Duarte, Audel Santos-Beltrán, Ivanovich Estrada-Guel, Carlos G. Garay-Reyes, Pedro Pizá-Ruiz, Cynthia D. Gómez-Esparza, Enrique Rocha-Rangel, Roberto Martínez-Sánchez
  MOLECULES, Vol.27. No.21. pp22 (2022)

• Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy

  J. C. Guía-Tello, C. G. Garay-Reyes, G. Rodríguez-Cabriales, H. M. Medrano-Prieto, M. A. Ruiz-Esparza-Rodríguez, L. J. García Hernández, J. M. Mendoza-Duarte, K. A. García-Aguirre, I. Estrada-Guel, S. González, R. Martínez-Sánchez
  JOURNAL OF MATERIALS SCIENCE, Vol.57. No.. pp2180–2193 (2022)

Reconocimientos y Distinciones

• Investigador Nacional Nivel 1

  CONAHCYT

• Premio Retsch GmbH

  Participación con el proyecto "Engineering Environmental Solutions: Graphite Expansion Preparation Through Mechanochemical Route for Oil Removal in Water

• 2023 M&M Posdoctoral Scholar Award

  Microscopy and Microanalisis

• Candidato a Investigador Nacional

  CONACYT