Carlos Gamaliel Garay Reyes

Educación

Doctor en Ciencia e Ingeniería de Materiales

Universidad Autónoma de San Luis Potosí (2013)

Maestro en Procesos y Materiales

Universidad Autónoma de Zacatecas (2009)

Ingeniero Industrial

Instituto Tecnológico de Zacatecas (2007)

Áreas de Interés

• Diseño y Desarrollo de Aleaciones
• Materiales Compuestos
• Relación Propiedades Mecánicas-Microestructura-Propiedades Físicas
• Transformaciones de Fase

Últimas publicaciones

• Study of Nanohardness and Scratch in a CoCrFeMnNiAl HEA Consolidated by High-Frequency-Induction Hea

  L. Baylon-García, J.M. Mendoza-Duarte, M.A. Ruiz-Esparza-Rodríguez, I. Estrada-Guel, R. Martínez-Sanchez, P.A. Guerrero-Seanez, A. Hurtado-Macías, A. Martinez-Garcia, S. Gonzalez, E.A. Juarez-Arellano, C.G. Garay-Reyes
  MATERIALS LETTERS, Vol.404. No.. pp139673 (2026)

• Elastic Energy Storage in Al–Al4C3 Composites: Effects of Dislocation Character and Interfacial Graphite Formation

  Audel Santos Beltrán, Verónica Gallegos Orozco, Hansel Manuel Medrano Prieto, Ivanovich Estrada Guel, Carlos Gamaliel Garay Reyes, Miriam Santos Beltrán, Diana Verónica Santos Gallegos, Carmen Gallegos Orozco, Roberto Martínez Sánchez
  MATERIALS, Vol.19. No.1. pp181 (2026)

• Microstructure and mechanical properties of medium Mn steel joints developed during the application of resistance spot welding

  Leonardo Weinmann Trejo, Carlos Gamaliel Garay Reyes, Mitsuo Osvaldo Ramos Azpeitia, Arnoldo Bedolla Jacuinde, José Luis Hernández Rivera
  MRS Advances, Vol.10 . No.. pp2632–2637 (2025)

• Microstructural Evolution and Mechanical Behavior of Al-Cu-Mg Alloy with Li and Graphite Additions Processed via High-Energy Ball Milling and Consolidated by High Induction

  J.M. Mendoza-Duarte, I. Estrada-Guel, P.A. Guerrero-Seañez, J.C. Guía-Tello, A. Martínez-García, E.A. Juárez-Arellano, C.G. Garay-Reyes, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.49. No.114159. pp (2025)

• Synergistic Effects of Sub-Micron WC Reinforcement and T6 Heat Treatment on the Evolution of Microstructure and Mechanical Behavior in Al–Cu–Mg Composites Fabricated Through

  Gustavo Rodríguez-Cabriales, Juan Pablo Flores-De los Ríos, Juan Francisco López de Lara-Herrera, Mario Sánchez-Carrillo, Hansel Manuel Medrano Prieto, Jose Manuel Mendoza-Duarte, Marco Antonio Ruiz-Esparza-Rodríguez, Carlos Gamaliel Garay-Reyes, Sergio González, Alfredo Martínez-García, Ivanovich Estrada-Guel, Roberto Martínez-Sánchez
  METALS, Vol.15. No.11. pp1216 (2025)

• Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Medium Mn Steel Sheet with Nb Addition

  J. L. Hernández-Rivera, M.O. Ramos Azpeitia, C.G. Garay-Reyes, A. Bedolla-Jacuinde.
  MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, Vol.28. No.. ppe20250343 (2025)

• Effects of Graphite Addition on Structure and Properties of CrCuFeNiTiAl1 High-Entropy Alloys

  Sergio Antonio García-Estrada, Ivanovich Estrada-Guel, Carlos Gamaliel Garay-Reyes, Cynthia Deisy Gómez-Esparza, Roberto Martínez-Sánchez, José Adalberto Castillo-Robles, José Amparo Rodríguez-García, Carlos Adrián Calles-Arriaga, Enrique Rocha-Rangel
  Eng MDPI, Vol.6. No.112. pp1-13 (2025)

• Cooling rate control combined with refractory Mo and/or V addition to enhance the mechanical properties of CoCrFeMnNi alloy

  S. González, C.G. Garay-Reyes, A. Martínez-García, Konda Gokuldoss Prashanth, M.A. Ruiz-Esparza-Rodríguez, A. Hurtado-Macías, J. Eckert, R. Martínez-Sánchez
  JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, Vol.36. No.. pp459-469 (2025)

• Geomimetic approaches in the design and synthesis of ordered L1₀-type structure platinum-based noble high entropy alloys at low temperature

  Garcia-Mendoza Teresa, Winkler Björn, Morgenroth Wolfgang, Barkov Andrei, Martinez-Garcia Alfredo, Garay-Reyes Carlos, Chiñas-Castillo Fernando, Juarez-Arellano Erick.
  INORGANIC CHEMISTRY, Vol.64. No.19. pp8174–8184 (2025)

• Mechanical properties of two novel non-equiatomic Zr-Hf-Ti-Cu-Ni-Co-Al High Entropy Alloys with high glass forming ability

  S. González, S. Wurster, C.G. Garay-Reyes, A. Hurtado-Macías, P. Ramasamy, D. Oleszak, C. Gammer, K.G. Prashanth, A Martínez-García, J. Eckert, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.1024. No. 180196 . pp (2025)

• Microstructure, Phase Evolution, and Mechanical Properties of CoCrNi. Medium-Entropy Alloy Processed by Powder Metallurgy Techniques

  M. G. Salazar-Juárez, I. Estrada-Guel, C. Gamaliel Garay-Reyes, C. D. Gómez-Esparza, R. Martínez-Sánchez, J. A. Castillo-Robles, C. A. Calles-Arriaga, E. Rocha-Rangel
  Metallophysics and Advanced Technologies, Vol.47. No.10. pp1111–1123 (2025)

• Relationship between Microstructure and Wear Behaviour in A356 Alloy and A356/Al2O3 and A356/WC Composites After Casting and Hot-Extrusion

  P.A. Guerrero-Seañez, C.G. Garay-Reyes, L.D. Laguna-Zubia, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, A. Martínez-García, J.L. Hernández-Rivera, J.J. Cruz-Rivera, R. Martínez-Sánchez
  METALS AND MATERIALS INTERNATIONAL, Vol.31. No.. pp742–751 (2025)

• High energy ball milling as a novel method to mecanolyze raw material for bio-H2 production by dark fermentations of Escherichia coli

  A. Martinez-Garcia, R. M. Velazquez-Vargas, E. A. Juarez-Arellano, C. G. Garay-Reyes, L. Perez-Picaso, O. Viñas-Bravo, A. K. Navarro-Mtz.
  ENERGY CONVERSION AND MANAGEMENT, Vol.325. No.. pp119405 (2025)

• Mechanosynthesis, characterization, and cytotoxic evaluation of soft ferromagnetic non-equiatomic high entropy alloys in the system Al10+xM12-xFe35Mn23Ni20 (M = Cr, Mo; x = 0, 0.2

  T García-Mendoza, JB Martinez Enriquez, D Ordaz Rosado, J Zamora, MA Peña-Rico, AK Navarro-Mtz, A Cruz-Nolasco, A Martinez-Garcia, CG Garay-Reyes, G Vásquez-Victorio, AJ Cortés-López, F Chiñas Castillo, E A Juarez-Arellano.
  MATERIALS CHEMISTRY AND PHYSICS, Vol.337. No.. pp130615 (2025)

• Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment

  L.J. García-Hernández, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, K.A. García-Aguirre, I. Estrada-Guel, S. González, J.M. Mendoza-Duarte, J. Camarillo-Cisneros, J.C. Guía-Tello, A. Martinez-Garcia, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.64. No.3. pp853-862 (2025)

• Enhancement of the Electrical Conductivity and Mechanical Properties of Al-Mg-Si and Al-Mg-Zn Ternary Systems After a T8 Heat Treatment

  X. Atanacio-Sánchez, C. G. Garay-Reyes, A. Martínez-García, I. Estrada-Guel, J. M. Mendoza Duarte, P. Guerrero-Seañez, S. González, Enrique Rocha-Rangel, J. J. Cruz-Rivera, E. J. Gutiérrez-Castañeda, R. Martínez-Sánchez
  METALS, Vol.14. No.11. pp1286 (2024)

• Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte

  A. Martinez-Garcia, Víctor M. Orozco-Carmona, J.M. Mendoza-Duarte, E.A. Juárez-Arellano, S. González, M.A. Ruíz-Esparza-Rodríguez, I. Estrada-Guel, C. G. Garay-Reyes, R. Martínez Sánchez
  ELECTROCHIMICA ACTA, Vol.497. No.. pp144601 (2024)

• Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment

  L. J. García-Hernández, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodríguez, K. A. García-Aguirre, I. Estrada-Guel, S. González, J. M. Mendoza-Duarte, J. Camarillo-Cisneros, J. C. Guía-Tello, A. Martinez-Garcia & R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.64. No.3. pp853–862 (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981-989 (2024)

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Aluminum Carbide Formation in Al-Graphite Composites: In Situ Study and Effects of Processing Variables and Sintering Method

  J.M. Mendoza-Duarte, I. Estrada-Guel, J. E. García-Herrera, R. Pérez-Bustamante, H. Arcos-Gutiérrez, A. Martínez-García, X. Atanacio Sánchez, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.28. No.. pp108396 (2024)

• Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

  H. M. Medrano-Prieto, A. Santos-Beltrán, V. Gallegos-Orozco, M. M. Santos-Beltrán, H. Camacho-Montes, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodriguez, I. Estrada-Guel, G. Rodríguez-Cabriales, J. C. Guía-Tello, J. M. Mendoza-Duarte, J. M. Silva-Aceves, J. S. Castro-Carmona, R. Martínez-Sánchez
  Metallography, Microstructure, and Analysis, Vol.13. No.. pp181-187 (2024)

• Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

  A. Martinez-Garcia, I. Estrada-Guel, E. Reguera, R. Amaro-Hernandez, S. González, C. G. Garay-Reyes, R. Martínez-Sánchez
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.50. No.. pp670-684 (2024)

• Investigation of the strain rate sensitivity of CoCrFeMnNiTix (x=0, 0.3) high entropy alloys using the shear punch test

  S. González, A. K. Sfikas, S. Kamnis, S.E. John, N.C. Barnard, C. Gammer, J. Eckert, C.G. Garay-Reyes, R. Martínez-Sánchez
  MATERIALS & DESIGN, Vol.233. No.. pp112294 (2023)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza- Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981–989 (2023)

• Influence of process conditions on the mechanical and microstructural features of milled Al sintered with rapid heating

  J.M. Mendoza-Duarte, I. Estrada-Guel, C.G. Garay-Reyes, R. Pérez-Bustamante, M. Romero-Romero, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.36. No.106539. pp1-7 (2023)

• Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components

  R.E. Villarreal-Loya, C.G. Garay-Reyes, J.M. Mendoza-Duarte, J.L. Hernández-Rivera, J.J. Cruz-Rivera, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS LETTERS, Vol.343. No.. pp134342 (2023)

• Abrasive Wear Behavior of Al-4Cu-1.5Mg-WC Composites Synthesized Through Powder Metallurgy

  G. Rodríguez-Cabriales, C.G. Garay-Reyes, J.C. Guía-Tello, H.M. Medrano Prieto, I. Estrada-Guel, L.J. García-Hernández, M.A Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, K.A. García-Aguirre, S. González, R. Martínez-Sánchez
  Lubricants, Vol.11. No.3. pp12 (2023)

• Wear resistant CoCrFeMnNi0.8V high entropy alloy with multi length-scale hierarchical microstructure

  S. Gonzalez, A.K. Sfikas, S. Kamnis, C.G. Garay-Reyes, A. Hurtado-Macias, R. Martínez-Sanchez.
  MATERIALS LETTERS, Vol.331. No.133504. pp4 (2023)

• Study of Al Addition on Sintered CuCrFeNiTi as a Potential Alloy for Automotive Components

  Enrique Rocha-Rangel, Ivanovich Estrada-Guel, José A. Castillo-Robles, José A. Rodríguez-García, Carlos G. Garay-Reyes, Alejandro Villalobos-Aragón, Cynthia D. Gómez-Esparza, Carlos Adrián Calles-Arriaga, Roberto Martínez-Sánchez
  METALS, Vol.13. No.77. pp9 (2023)

• Texture, microstructure and mechanical properties of AA7075-graphite composites produced through mechanical alloying and hot-extrusion.

  E. Gutiérrez, E. Salazar, A. Salinas, R. Deaquino, A. Ponce, M. Yacaman, D. Alducin, E. Ortega, A. Bedolla, B. Fernández, R. Martínez, C. Garay
  MATERIALS CHEMISTRY AND PHYSICS, Vol.296. No.. pp14 (2023)

• Effect of Process Parameters on the Graphite Expansion Produced by a Green Modification of the Hummers Method

  Gabriela Tarango-Rivero, José M. Mendoza-Duarte, Audel Santos-Beltrán, Ivanovich Estrada-Guel, Carlos G. Garay-Reyes, Pedro Pizá-Ruiz, Cynthia D. Gómez-Esparza, Enrique Rocha-Rangel, Roberto Martínez-Sánchez
  MOLECULES, Vol.27. No.21. pp22 (2022)

• High temperature microstructure and mechanical properties of as-cast medium Mn steel with V addition

  Ana Claudia Gonzalez-Castillo, Carlos Gamaliel Garay-Reyes, José Luis Hernández-Rivera
  INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol.35. No.4. pp111-120 (2022)

• Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys

  M.A. Ruiz-Esparza-Rodríguez, C.G. Garay-Reyes, J.M. Mendoza-Duarte, I.Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, S. González, A.M. Garay-Tapia, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.910. No.. pp164780 (2022)

• Dispersion of graphite, Ceria, and nanohybrid Ceria-graphite in the 6063 aluminum alloy through powder metallurgy

  M.L. Camacho-Rios, C.G. Garay-Reyes, D. Lardizabal-Gutierrez, I. Estrada-Guel, R. Perez-Bustamante, G. Herrera-Perez, A. Santos-Beltran, G. Rodríguez-Cabriales, C. D. Gomez-Esparza, R. Martínez-Sanchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.281. No.. pp125953 (2022)

• Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys

  M.A. Ruiz-Esparza-Rodrígueza , C.G. Garay-Reyesa,⁎ , J.M. Mendoza-Duartea , I. Estrada-Guela , J.L. Hernández-Riverab,c , J.J. Cruz-Riverac , E. Gutiérrez-Castañedab,c , S. Gonzálezd , A.M. Garay-Tapiaa , R. Martínez-Sáncheza,⁎
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.910. No.. pp (2022)

• Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy

  J. C. Guía-Tello, C. G. Garay-Reyes, G. Rodríguez-Cabriales, H. M. Medrano-Prieto, M. A. Ruiz-Esparza-Rodríguez, L. J. García Hernández, J. M. Mendoza-Duarte, K. A. García-Aguirre, I. Estrada-Guel, S. González, R. Martínez-Sánchez
  JOURNAL OF MATERIALS SCIENCE, Vol.57. No.. pp2180–2193 (2022)

• Evolution of microstructure and texture in low-carbon grain non-oriented electrical steels processed from solid-state columnar microstructures

  María Hernández‑Miranda, Emmanuel Gutiérrez‑Castañeda, Salvador Palomares‑Sánchez, Pedro Cruz‑Alcántar, Antonio Aragón‑Piña, Armando Salinas‑Rodríguez, Francisco García‑Pastor, Arnoldo Bedolla‑Jacuinde, Carlos Garay‑Reyes, Roberto Martínez‑Sánchez, Iván Reyes‑Domínguez, Javier Aguilar‑Carrillo
  Metallography, Microstructure, and Analysis, Vol.10. No.. pp876–889 (2021)

• Influence of Process Control Agent and Al Concentration on Synthesis and Phase Stability of a Mechanically Alloyed AlxCoCrFeMnNi High-Entropy Alloy

  M.A. Ruiz-Esparza-Rodriguez, C.G. Garay-Reyes, I. Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, C.D. Gómez-Esparza, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.882. No.160770. pp1-11 (2021)

• Using Intercritical CCT Diagrams and Multiple Linear Regression for the Development of Low-Alloyed Advanced High-Strength Steels

  Bryan Y. Navarrete Pino, Antonio A. Torres Castillo, Emmanuel J. Gutiérrez Castañeda, Luis A. Espinosa Zúñiga, Lorena Hernández Hernández, Armando Salinas Rodríguez, Rogelio Deaquino Lara , Rocío Saldaña Garcés , Iván A. Reyes Domínguez, Javier Aguilar Carrillo, Arnoldo Bedolla Jacuinde, Carlos G. Garay Reyes, Roberto Martínez Sánchez
  Metals, Vol.11. No.. pp1768 (2021)

• Effect of plastic deformation on the precipitation reaction in 2024 alloys

  J.C. Guía-Tello, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, L.J. García-Hernández, J. Aguilar Santillán, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.271. No.124927. pp1-5 (2021)

• 3D-FEM Simulation of Hot Rolling Process and Characterization of the Resultant Microstructure of a Light-Weight Mn Steel

  Ana Claudia González-Castillo, José de Jesús Cruz-Rivera, Mitsuo Osvaldo Ramos-Azpeitia, Pedro Garnica-González, Carlos Gamaliel Garay-Reyes, José Sergio Pacheco-Cedeño, José Luis Hernández-Rivera
  CRYSTALS, Vol.11. No.5. pp569 (2021)

• Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route

  J. M. Mendoza-Duarte, F. C. Robles-Hernandez, E. Rocha-Rangel, Y. Todaka, N. Adachi, I. Estrada-Guel, C. G. Garay-Reyes, M. A. Ruiz Esparza-Rodríguez, R. Martínez-Sánchez
  JOURNAL OF MATERIALS RESEARCH, Vol.36. No.. pp1328-1340 (2021)